Floors are the part of your house that's most vulnerable to dust, dirt, and germs. That’s why regular cleaning is essential not only to enhance the look of your floors but also to stay clear of those microbes that may bring diseases to your family. However, floors are not created equal. It means that for every type of house flooring, there’s a proper cleaning method that you need to follow to eliminate the dirt and germs and to avoid damaging its surface. For you to brush up your knowledge about how to clean the floor in your home, here’s a list of proper cleaning methods for different types of floors that may help you.
Vinyl Floors
One of the best ways to clean vinyl floors is to use a spritz-and-dry mop technique. By this method, you’ll keep the look of your vinyl floors spotless and fresh. Typically, people use a mixture of 1 drop of dish soap, ¼ cup of vinegar, and lukewarm water inside a spray bottle. With the spray bottle, you have to spritz the cleaning solution onto a part of the floor and wipe it with a slightly wet mop as you go. For deep cleaning, it’s advisable to use a steam cleaner to remove stains and bacteria from the surface.
Slate Floors
Slate floors are perhaps the hardest to clean among other types of flooring. But if you know the right method on how to clean it, it won’t be as hard as you imagine. You only need a broom, a mop, and a mixture of vinegar and warm water. First, you need to sweep the dust and dirt off the surface. Using a light broom will be ideal for this work. Then, apply the solution of warm water and vinegar onto the floor. Mop it in one direction and then in the opposite direction to thoroughly eliminate the dust and dirt clinging through the grooves. For final touches, you need to get a dry mop and use it on the floor surface to keep it looking good.
If you find it hard to clean your slate floors, you can go to Maid Complete opening in Miami to hire a cleaning service.
Linoleum Floors
If you don’t have a steam mop, you can use a microfiber mop to make your linoleum floor look spotless. But before mopping, you need to get rid of surface marks (if there’s any) with a fine grade steel wool. After that, you can now apply a mixture of dish soap and water and wipe it with a damp microfiber mop. You can also use a cleaning solution of eucalyptus oil and water to remove dirt and stains, as well as to avoid stickiness on the surface.
Hardwood Floors
Hardwood floors often have a wax or polyurethane finishes. You will notice if it has a wax finish if there appears a smudge when you rub your fingers on it. For wax-finished hardwood floors, you need avoid using water to clean its surface. You can sweep, vacuum, or use a dust mop for it regularly instead. For sealed wood floors, on the other hand, it’s advisable to apply on the surface a mixture of water and mild soap. Then dry it with a microfiber wipe to remove stickiness and moisture on the surface. Caution: avoid using cleaning solutions that have vinegar in it because it can cause the floor to look dull.
Concrete Floors
Concrete floors are very porous and not resistant to stains. That’s why it’s necessary to seal it. But before sealing, you should make sure that you sweep the dirt off the surface and clean it with an all-purpose cleaner. Use a stiff brush or broom to clean it thoroughly.
Carpet Flooring
If you have a carpet flooring, it will do you good to vacuum it once or twice a week to remove dust and other microbes on its surface. For stains, a carpet shampoo is what you need to get rid of it. Apply the shampoo to the stained handmade rugs, put just a little bit of water, and scrub it using a long hair brush. Then, let the carpet dry for several minutes.
Takeaway
It’s essential that you clean your floors regularly. However, there are different cleaning methods for you to follow for a particular floor type you have at home. You can take some clues from the list of cleaning methods above for you to keep your floor clean and spotless.
Read More: Life-Changing Interior Design Ideas for Small Spaces